Question on the Grizzly G0555 models: Dust collection

  • Advertise with us

« back to Jigs & Fixtures forum

Forum topic by Nezzerscape posted 01-14-2016 06:14 PM 1061 views 0 times favorited 1 reply Add to Favorites Watch
View Nezzerscape's profile


32 posts in 2195 days

01-14-2016 06:14 PM

Topic tags/keywords: g0555 g0555lx dust collection

I am in the market for a Bandsaw. I have narrowed it down to the Grizzly G0555 models. Not looking for suggestions or reviews (I have read most of them). What I am looking for is advice on upgrading / modifying their dust collection. Has anyone added brushes? Has anyone build a containment system?

Thank you in advance,

1 reply so far

View Wildwood's profile


2959 posts in 3466 days

#1 posted 01-14-2016 09:13 PM

Have a G0555 ultimate band saw and that 4” port does a good job connected to a dust collector. Have not added a brush for the wheel, but do open the bottom door after heavy use and hit that area with my shop vac. Did look into getting a 2 ½” hose & nozzle set up so can suck up dust from table top & and lower bearing area. Currently hit those areas with my shop vac. Cannot find unit looked at couple years ago, for what wanted to do would set me back about $75 for upper & lower set up.

When really get crazy trying to cut wet wood that gums up the blade & wheels. Use a brass brush on those areas to clean with little problem. Can never find my can of Dollar store cooking spray and apply before going crazy! Think wife borrowed it on no return plan.

-- Bill

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics