Alum. Kehoe JIG

  • Advertise with us

« back to Jigs & Fixtures forum

Forum topic by Midway posted 11-08-2015 01:38 PM 705 views 0 times favorited 0 replies Add to Favorites Watch
View Midway's profile


62 posts in 1476 days

11-08-2015 01:38 PM

Topic tags/keywords: jig

For all you Kehoe jig users. slot in alum. jig is 2 deg. in all the videos and documation they

say the slot is 1 deg. Rusty Nail loaned me his new jig and i set it up on my bridgeport with

digital readout and checked the slot angle. The guide slot has 1 deg angle PER SIDE. 1 +1 = 2 deg.

the sled to cut pins should be 1 deg. (.01745 per inch)

Cut a pin and measure from small end 1.00 and make a mark on top edge, now measure at very

top of pin at small end and at marked area if everything is right the difference will be .0349

-- Midway wichita,ks.

0 replies so far

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics