LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.
1 - 2 of 2 Posts

·
Registered
Joined
·
35 Posts
I got my table saw for free. It has been a lot of hassle, but it is working pretty well now… and it was free. However, it did not come with a miter gauge, and several recent projects have been slowed by the lack thereof.

It probably isn't worth bothering with shipping, because I can get one off Amazon for ~$20. So this is for anyone in Northern IN. I live in Warsaw, and would be willing to drive ~45 minutes to wherever you are. If you have an old miter gauge (or two) laying around, and you are willing to part with it, PM me to work something out.

Thanks!!
Jon
 

·
Registered
Joined
·
9,172 Posts
Usually the first thing I do with a saw is toss the standard miter gauge in the rat hole and use a sled instead. If you are looking for a standard one, you might want to mention your saw model as not all use the same sized miter slots, and some have t-slots or tabbed slots.

Cheers,
Brad
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top