LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.
1 - 5 of 5 Posts

·
Registered
Joined
·
91 Posts
Hi all,
I am trying to find information on placing a wine rack in a cabinet for a wet bar. Does anyone know of a good place that sells them or good plans on building one that is not to complicated?
Thanks for the assist.
El
 

·
Registered
Joined
·
1,636 Posts
This might work better in the design forum, but there are tons of ways to fit a wine rack inside a cabinet. I've seen the horizontal & perpendicular slats that can be batched to fit inside, the diagonal slats where the bottles stack in the bottom of the "V". If you Google "wine rack" and then click on "images", you should get all kinds of ideas. Some will have the stemware hanging upside down from the top.
 

·
Registered
Joined
·
348 Posts
hi dear
If you are going to build your own rack then you might want to take a look at wire rack plans that were designed by a professional craftsman. If you do this then you can rest assured that they know what they are talking about and are going to make sure that you have a good design and that all of the proper materials are used.Click this link
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top