LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.
1 - 7 of 7 Posts

·
Registered
Joined
·
370 Posts
You don't really have to angle the mortise, as long as you have a lot of long grain glue surface even a wedge in a straight through tenon is there for your lifetime then many more.

If it is a big tenon, big mortise, you have to think about being able to split that stock- ie, you have to consider doing multiple wedges.

Build a bandsaw jig that cuts width wise on you desired angle, flip the stock over after every cut and get tons of perfect wedges every cut.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top