LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.
1 - 8 of 8 Posts

·
Registered
Joined
·
824 Posts
Do I do Tool Gloats here? I guess it don't matter, I'm going to anyway. ha

Pictured:
Jet Contractor Style 1.5HP/ 3HP peak. (can't recall the model number)
Cast Iron Wings
50" Xacta Fence and rails/table system
Incra SE1000 Miter Gage
Jet blade and 2 Freud blades
Dado set
2 dado inserts and 1 zero clearance insert
Oak cover for the cast iron to protect if need more work area.

Not Pictured:
Penn State Industries 1HP DC1B-XL Dust Collector with 2 Micron Bags

All for $500.00

Yes, all tested and approved!

All I need to get is a mobile base… any suggestions?

 

·
Registered
Joined
·
27,252 Posts
Kerux, it is always an exciting time when we get new tools in the shop. Sounds like you got some pretty nice bargains.

As far as the mobile base goes I have used this one from Rockler. You have to make up your own stretchers with 1.5" square hardwood stock. And I have built my own from plywood and 2×4s.
 

·
Registered
Joined
·
55 Posts
Congrats! It's a very good saw that will do anything you need it to do. I had an older model with the stamped steel wings and made many a project with it.
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top