Joined
·
824 Posts
Just read through the whole blog building this chair. And i must say it is one of the best and most thorough blogs i have read. Learned a lot and enjoyed the read.Stain and Lacquer
I sprayed the chair with Rodda #19 stain, which I thin with a splash of mineral spirits.
-
-
-
-
-
After the chair had dried for 24-48 hours I sprayed Rudd lacquer (Satin sheen), which I strain and thin 20% with lacquer thinner. After the first coat I sanded with 320 grit soft sponges, and cleaned the dust with cheese cloth (not tack cloth) and compressed air.
-
-
-
-
-
After the second coat I wet sanded with 1500 grit soft sponges. The whole chair only took 15-20 minutes to wet sand.
-
-
-
-
-
The Rudd lacquer sprayed well, and left a nice satin finish without too much fuss.
-
-
-
-
-
Here is the completed project page…
http://lumberjocks.com/projects/99452
Cheers!
Thank you so much for sharing!
Attachments
-
37.7 KB Views: 7
-
36.3 KB Views: 5
-
35.4 KB Views: 5
-
37.9 KB Views: 8