Joined
·
180 Posts
A great read, loved following all the steps. Sad its finally over. Great job Pinto!Stain and Lacquer
I sprayed the chair with Rodda #19 stain, which I thin with a splash of mineral spirits.
-
-
-
-
-
After the chair had dried for 24-48 hours I sprayed Rudd lacquer (Satin sheen), which I strain and thin 20% with lacquer thinner. After the first coat I sanded with 320 grit soft sponges, and cleaned the dust with cheese cloth (not tack cloth) and compressed air.
-
-
-
-
-
After the second coat I wet sanded with 1500 grit soft sponges. The whole chair only took 15-20 minutes to wet sand.
-
-
-
-
-
The Rudd lacquer sprayed well, and left a nice satin finish without too much fuss.
-
-
-
-
-
Here is the completed project page…
http://lumberjocks.com/projects/99452
Cheers!
Attachments
-
37.9 KB Views: 33
-
37.7 KB Views: 8
-
36.3 KB Views: 6
-
35.4 KB Views: 5