LumberJocks Woodworking Forum banner
1 - 1 of 1 Posts

· Registered
68 Posts
I am finishing my plant stand project and having trouble with the stain being splotchy. On red oak, I applied a 2lb cut of amber shellac. Lightly sanded with 400 grit. Then, applied 2 coats of GF walnut gel stain. I chose the shellac under coat and gel stain specificly to aviod the splotch. Any advice out there?

Ladder Wood Floor Stool Flooring

Easel Wood Interior design Table Floor


1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.