LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.
1 - 3 of 3 Posts

·
Registered
Joined
·
708 Posts
Okay here is a coffee table I've been working on for MYSELF! So it's been work here and there on it but it's almost all finished up, actually have a coat of oil on the top and main section. The top is veneered baltic birch wrapped with 3'' miter walnut, the middle section is solid walnut, the drawers are 3/4'' maple with the curly maple veneered to the faces.

I got 12 pieces of veneer from a piece of maple under 2'' thick

My question is should I have drawer pulls?

The drawers slide through, one long drawer kinda thing, i was always planning to make my own pulls but now someone mentioned that I should not put handles on there really not needed.

So what do you all think?











 

·
Registered
Joined
·
8,740 Posts
I agree with Jim - they should be wood pulls, and have to be properly designed to match the piece while not taking away from it - as it's already very balanced as is…

nice piece!
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top