LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.
1 - 1 of 1 Posts

·
Registered
Joined
·
198 Posts
There was a recent question about using a MK2 honing gage to sharpen spokeshave blades. I can hone free hand with chisels and plane blades but can't seen to stay consistent with the short blade. I use my MK 2 this way, set the body on the green button and the blade gage on yellow 35 for the primary bevel. Spin the roller wheel down 2 clicks and you get a 2 degree or so micro bevel. Repeatable and easy.

I have posted a couple pic's of the set up to get a 25 degree primary bevel. I hope the pictures show up and I hope this helps

http://s855.photobucket.com/albums/ab114/mlribar/?action=view&current=100_1206.jpg
http://s855.photobucket.com/albums/ab114/mlribar/?action=view&current=100_1205.jpg
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top