Woodsmith - Box Joint Jig (Rating: 1)

This jig is worthless and is being returned to the seller. The index pin is too short making registration with your workpiece difficult.The knob controlling the index pin is too close to the bottom of the jig and is difficult to set because of its small size and location. More importantly, it does not maintain its setting. It loosens slightly as you progress through your joints ruining the spacing in your workpiece. The workpiece likes to pull away from the fence (when used on a router table) when cutting a partial joint on the outside edge and must be clamped to the fence for safety. You must use your own clamps. There are better jigs out there. This is not one of them.