LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.
1 - 1 of 1 Posts

· Registered
Joined
·
4,501 Posts
I'm not familiar with that brand, but if it like mine, there is a 1/2" spindle and you slide the rubber drum over it with the corresponding size sandpaper drum. When you tighten the nut on the top it expands the rubber into the paper drum to hold it tight. With mine if I don't tighten up the nut ans washer on top, the drum will slide up and down freely. I'm trying to picture what is happening to yours if you did not have the washer. it seems that it would be too loose to work. Can you remove the nut on top?

Can you post a picture of it? Use the IMG above here to load in a photo.

Thanks,Jim
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top