LumberJocks Woodworking Forum banner
1 - 1 of 15 Posts

· Registered
1,501 Posts
Mike, here's a photo of a horizontal mortiser that I made several years ago. I use it mostly for cutting tenons on the ends of long stock, but it works well for mortises too. Very simple and stable. The one that Steve posted looks a little unstable, with too much hardware. It's based on the one in the book "Making classic Joints with power tools" by Yeung Chan
1 - 1 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.