LumberJocks Woodworking Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
35 Posts
Discussion Starter · #1 ·
Radius faces for boxes.

This is a fairly easy method for getting to radius fase for boxes & other curved detail in home workshop.

Wood Table Automotive tire Machine tool Workbench


It is a simple compass for the router, which I made with a long thread & piece of plywood.

Wood Gas Digital camera Camera accessory Hardwood


I take a board of beech & fixed it on table. After that, I doing moves router back and forth, every time lowering the bit on the router, until it gone under down of detail through it. I leave little thickness.

Wheel Tire Bicycle tire Hood Automotive tire


I was cutting detail by fret saw & after - processing by the router, with template bit.

Wood Flooring Floor Wood stain Automotive exterior


This is a detail after gluing.
 

Attachments

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top