WOW!!! Unbelieveable glue up!!!! Great job!!!Make a start...
Today, as I make my way out to the workshop, ideas are flying around… having looked at the information on lamination design that Scott sent….wow… so many new thoughts are spinning through my head… I had an inkling as to how it was done… but now the technical part is explained…
So, to the shed…..rip, glue, crosscut, glue, crosscut at a different angle and glue again… then sand, sand, and sand some more…
![]()
These three boards were made using a design from WoodTurnerPro. [available for free download.]...Can't wait to see how this all works out….although I think I will stop at the second…. for the time being anyway…
NB… I did not make these boards… they are made by WoodTurnerPro… I use them as illustration only…
Next Generation Cheese boards...
Make a start...
Today, as I make my way out to the workshop, ideas are flying around… having looked at the information on lamination design that Scott sent….wow… so many new thoughts are spinning through my head… I had an inkling as to how it was done… but now the technical part is explained…
So, to the shed…..rip, glue, crosscut, glue, crosscut at a different angle and glue again… then sand, sand, and sand some more…
![]()
These three boards were made using a design from WoodTurnerPro. [available for free download.]...Can't wait to see how this all works out….although I think I will stop at the second…. for the time being anyway…
NB… I did not make these boards… they are made by WoodTurnerPro… I use them as illustration only…
Today, as I make my way out to the workshop, ideas are flying around… having looked at the information on lamination design that Scott sent….wow… so many new thoughts are spinning through my head… I had an inkling as to how it was done… but now the technical part is explained…
So, to the shed…..rip, glue, crosscut, glue, crosscut at a different angle and glue again… then sand, sand, and sand some more…
These three boards were made using a design from WoodTurnerPro. [available for free download.]...Can't wait to see how this all works out….although I think I will stop at the second…. for the time being anyway…
NB… I did not make these boards… they are made by WoodTurnerPro… I use them as illustration only…
1 - 20 of 166 Posts
Sweet.Make a start...
Today, as I make my way out to the workshop, ideas are flying around… having looked at the information on lamination design that Scott sent….wow… so many new thoughts are spinning through my head… I had an inkling as to how it was done… but now the technical part is explained…
So, to the shed…..rip, glue, crosscut, glue, crosscut at a different angle and glue again… then sand, sand, and sand some more…
![]()
These three boards were made using a design from WoodTurnerPro. [available for free download.]...Can't wait to see how this all works out….although I think I will stop at the second…. for the time being anyway…
NB… I did not make these boards… they are made by WoodTurnerPro… I use them as illustration only…
Where will it end?
Steve
keep it up larryMake a start...
Today, as I make my way out to the workshop, ideas are flying around… having looked at the information on lamination design that Scott sent….wow… so many new thoughts are spinning through my head… I had an inkling as to how it was done… but now the technical part is explained…
So, to the shed…..rip, glue, crosscut, glue, crosscut at a different angle and glue again… then sand, sand, and sand some more…
![]()
These three boards were made using a design from WoodTurnerPro. [available for free download.]...Can't wait to see how this all works out….although I think I will stop at the second…. for the time being anyway…
NB… I did not make these boards… they are made by WoodTurnerPro… I use them as illustration only…
you are doing fantastic work
pretty soon
you will be able to lay back
(with so many sales)
and can righteously
be called
lazy
WOW…Make a start...
Today, as I make my way out to the workshop, ideas are flying around… having looked at the information on lamination design that Scott sent….wow… so many new thoughts are spinning through my head… I had an inkling as to how it was done… but now the technical part is explained…
So, to the shed…..rip, glue, crosscut, glue, crosscut at a different angle and glue again… then sand, sand, and sand some more…
![]()
These three boards were made using a design from WoodTurnerPro. [available for free download.]...Can't wait to see how this all works out….although I think I will stop at the second…. for the time being anyway…
NB… I did not make these boards… they are made by WoodTurnerPro… I use them as illustration only…
You are BOGGLING my mind… what's left of it… LOLMake a start...
Today, as I make my way out to the workshop, ideas are flying around… having looked at the information on lamination design that Scott sent….wow… so many new thoughts are spinning through my head… I had an inkling as to how it was done… but now the technical part is explained…
So, to the shed…..rip, glue, crosscut, glue, crosscut at a different angle and glue again… then sand, sand, and sand some more…
![]()
These three boards were made using a design from WoodTurnerPro. [available for free download.]...Can't wait to see how this all works out….although I think I will stop at the second…. for the time being anyway…
NB… I did not make these boards… they are made by WoodTurnerPro… I use them as illustration only…
Great stuff!
... and I can see how you did it! ... brain is numb…
Thank you!
Looking good.Make a start...
Today, as I make my way out to the workshop, ideas are flying around… having looked at the information on lamination design that Scott sent….wow… so many new thoughts are spinning through my head… I had an inkling as to how it was done… but now the technical part is explained…
So, to the shed…..rip, glue, crosscut, glue, crosscut at a different angle and glue again… then sand, sand, and sand some more…
![]()
These three boards were made using a design from WoodTurnerPro. [available for free download.]...Can't wait to see how this all works out….although I think I will stop at the second…. for the time being anyway…
NB… I did not make these boards… they are made by WoodTurnerPro… I use them as illustration only…
great work LarryMake a start...
Today, as I make my way out to the workshop, ideas are flying around… having looked at the information on lamination design that Scott sent….wow… so many new thoughts are spinning through my head… I had an inkling as to how it was done… but now the technical part is explained…
So, to the shed…..rip, glue, crosscut, glue, crosscut at a different angle and glue again… then sand, sand, and sand some more…
![]()
These three boards were made using a design from WoodTurnerPro. [available for free download.]...Can't wait to see how this all works out….although I think I will stop at the second…. for the time being anyway…
NB… I did not make these boards… they are made by WoodTurnerPro… I use them as illustration only…
what do you use that beutyfull laminated bowsaw for and why havn´t you showed all of it
did i miss a blog about that one ... as usual
take care
Dennis
Larry you are going to have some awesome boards with new looks. Looking forward to see your new designs.Make a start...
Today, as I make my way out to the workshop, ideas are flying around… having looked at the information on lamination design that Scott sent….wow… so many new thoughts are spinning through my head… I had an inkling as to how it was done… but now the technical part is explained…
So, to the shed…..rip, glue, crosscut, glue, crosscut at a different angle and glue again… then sand, sand, and sand some more…
![]()
These three boards were made using a design from WoodTurnerPro. [available for free download.]...Can't wait to see how this all works out….although I think I will stop at the second…. for the time being anyway…
NB… I did not make these boards… they are made by WoodTurnerPro… I use them as illustration only…
wow larry…looks like you have been busy being creative, and less time suckin down the kool aid…....themj brain cells are growing back…lol…....oh and dont forget to sand …Make a start...
Today, as I make my way out to the workshop, ideas are flying around… having looked at the information on lamination design that Scott sent….wow… so many new thoughts are spinning through my head… I had an inkling as to how it was done… but now the technical part is explained…
So, to the shed…..rip, glue, crosscut, glue, crosscut at a different angle and glue again… then sand, sand, and sand some more…
![]()
These three boards were made using a design from WoodTurnerPro. [available for free download.]...Can't wait to see how this all works out….although I think I will stop at the second…. for the time being anyway…
NB… I did not make these boards… they are made by WoodTurnerPro… I use them as illustration only…
Larry, you are unstoppable. Very unique design's with lots of character. I like the border, it remind's me of how the old fashion bread boards were made.Make a start...
Today, as I make my way out to the workshop, ideas are flying around… having looked at the information on lamination design that Scott sent….wow… so many new thoughts are spinning through my head… I had an inkling as to how it was done… but now the technical part is explained…
So, to the shed…..rip, glue, crosscut, glue, crosscut at a different angle and glue again… then sand, sand, and sand some more…
![]()
These three boards were made using a design from WoodTurnerPro. [available for free download.]...Can't wait to see how this all works out….although I think I will stop at the second…. for the time being anyway…
NB… I did not make these boards… they are made by WoodTurnerPro… I use them as illustration only…
-Don
Dang Larry - will you marry me! (bring the cheese boards).Make a start...
Today, as I make my way out to the workshop, ideas are flying around… having looked at the information on lamination design that Scott sent….wow… so many new thoughts are spinning through my head… I had an inkling as to how it was done… but now the technical part is explained…
So, to the shed…..rip, glue, crosscut, glue, crosscut at a different angle and glue again… then sand, sand, and sand some more…
![]()
These three boards were made using a design from WoodTurnerPro. [available for free download.]...Can't wait to see how this all works out….although I think I will stop at the second…. for the time being anyway…
NB… I did not make these boards… they are made by WoodTurnerPro… I use them as illustration only…
Seriously, those look really neat makes me want to run right out and start one. Of course, I still have all those other designs you've shared to work on.
Very impressive design and glue-up, great work on these.Make a start...
Today, as I make my way out to the workshop, ideas are flying around… having looked at the information on lamination design that Scott sent….wow… so many new thoughts are spinning through my head… I had an inkling as to how it was done… but now the technical part is explained…
So, to the shed…..rip, glue, crosscut, glue, crosscut at a different angle and glue again… then sand, sand, and sand some more…
![]()
These three boards were made using a design from WoodTurnerPro. [available for free download.]...Can't wait to see how this all works out….although I think I will stop at the second…. for the time being anyway…
NB… I did not make these boards… they are made by WoodTurnerPro… I use them as illustration only…
Did you say you did not make these boards?Make a start...
Today, as I make my way out to the workshop, ideas are flying around… having looked at the information on lamination design that Scott sent….wow… so many new thoughts are spinning through my head… I had an inkling as to how it was done… but now the technical part is explained…
So, to the shed…..rip, glue, crosscut, glue, crosscut at a different angle and glue again… then sand, sand, and sand some more…
![]()
These three boards were made using a design from WoodTurnerPro. [available for free download.]...Can't wait to see how this all works out….although I think I will stop at the second…. for the time being anyway…
NB… I did not make these boards… they are made by WoodTurnerPro… I use them as illustration only…
They look pretty realistic.
I just downloaded this particular project. Thanks for sharing.
Those are over the top!!!!!!!!!!Make a start...
Today, as I make my way out to the workshop, ideas are flying around… having looked at the information on lamination design that Scott sent….wow… so many new thoughts are spinning through my head… I had an inkling as to how it was done… but now the technical part is explained…
So, to the shed…..rip, glue, crosscut, glue, crosscut at a different angle and glue again… then sand, sand, and sand some more…
![]()
These three boards were made using a design from WoodTurnerPro. [available for free download.]...Can't wait to see how this all works out….although I think I will stop at the second…. for the time being anyway…
NB… I did not make these boards… they are made by WoodTurnerPro… I use them as illustration only…
Larry, so very cool!!!!Make a start...
Today, as I make my way out to the workshop, ideas are flying around… having looked at the information on lamination design that Scott sent….wow… so many new thoughts are spinning through my head… I had an inkling as to how it was done… but now the technical part is explained…
So, to the shed…..rip, glue, crosscut, glue, crosscut at a different angle and glue again… then sand, sand, and sand some more…
![]()
These three boards were made using a design from WoodTurnerPro. [available for free download.]...Can't wait to see how this all works out….although I think I will stop at the second…. for the time being anyway…
NB… I did not make these boards… they are made by WoodTurnerPro… I use them as illustration only…
Larry my friend, if I know you, there will soon be a level four!Make a start...
Today, as I make my way out to the workshop, ideas are flying around… having looked at the information on lamination design that Scott sent….wow… so many new thoughts are spinning through my head… I had an inkling as to how it was done… but now the technical part is explained…
So, to the shed…..rip, glue, crosscut, glue, crosscut at a different angle and glue again… then sand, sand, and sand some more…
![]()
These three boards were made using a design from WoodTurnerPro. [available for free download.]...Can't wait to see how this all works out….although I think I will stop at the second…. for the time being anyway…
NB… I did not make these boards… they are made by WoodTurnerPro… I use them as illustration only…
Paul
i am with SPalm--where will this end??Make a start...
Today, as I make my way out to the workshop, ideas are flying around… having looked at the information on lamination design that Scott sent….wow… so many new thoughts are spinning through my head… I had an inkling as to how it was done… but now the technical part is explained…
So, to the shed…..rip, glue, crosscut, glue, crosscut at a different angle and glue again… then sand, sand, and sand some more…
![]()
These three boards were made using a design from WoodTurnerPro. [available for free download.]...Can't wait to see how this all works out….although I think I will stop at the second…. for the time being anyway…
NB… I did not make these boards… they are made by WoodTurnerPro… I use them as illustration only…
Yeah, Wow! Nice.Make a start...
Today, as I make my way out to the workshop, ideas are flying around… having looked at the information on lamination design that Scott sent….wow… so many new thoughts are spinning through my head… I had an inkling as to how it was done… but now the technical part is explained…
So, to the shed…..rip, glue, crosscut, glue, crosscut at a different angle and glue again… then sand, sand, and sand some more…
![]()
These three boards were made using a design from WoodTurnerPro. [available for free download.]...Can't wait to see how this all works out….although I think I will stop at the second…. for the time being anyway…
NB… I did not make these boards… they are made by WoodTurnerPro… I use them as illustration only…
First glue up...
Got stuck into ripping and gluing today…
![Table Wood Rectangle Line Wood stain]()
These are actually for another project… but hey I did them today…
![Musical instrument Wood Gas Engineering Machine]()
when this is dry I intend to make it to the second generation…
Got stuck into ripping and gluing today…
These are actually for another project… but hey I did them today…
when this is dry I intend to make it to the second generation…
Attachments
1 - 20 of 166 Posts
