LumberJocks Woodworking Forum banner

Newbie Question Time!

1371 Views 4 Replies 4 Participants Last post by  JGM0658
So, I was tasked to come up with a sign design for a wedding….So, I did….BUT, I have NO IDEA how to execute my design….

I will be using Kill Beatle Pine~ (Not sure if that makes a difference)

Can you all give me idea HOW TO join the wood for the 'cirlcle' and ideas as to HOW to
join the horizontal boards to the circle?

I am COMPLETELY new to woodworking…..and I have never really done any joinery~ But I am up for the challenge.
I have basic tools….band saw, router, table saw, miter saw, circle saw, drill)

Any and ALL thoughts/suggestions are welcome~~~~ PAAAAALEEEZE…and thank you!

Handwriting Font Material property Drawing Paper


See less See more
1 - 1 of 5 Posts
Do you have to join boards É Maybe you can just do it all within a larger board. Or do a basic glue up of three boards that are long enough so you can use one end of them for the circle, ie the circle is actually part of those boards. To fit and attach the circle separately would be quite a bit harder.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.