LumberJocks Woodworking Forum banner

Newbie Question Time!

1369 Views 4 Replies 4 Participants Last post by  JGM0658
So, I was tasked to come up with a sign design for a wedding….So, I did….BUT, I have NO IDEA how to execute my design….

I will be using Kill Beatle Pine~ (Not sure if that makes a difference)

Can you all give me idea HOW TO join the wood for the 'cirlcle' and ideas as to HOW to
join the horizontal boards to the circle?

I am COMPLETELY new to woodworking…..and I have never really done any joinery~ But I am up for the challenge.
I have basic tools….band saw, router, table saw, miter saw, circle saw, drill)

Any and ALL thoughts/suggestions are welcome~~~~ PAAAAALEEEZE…and thank you!

Handwriting Font Material property Drawing Paper


See less See more
1 - 1 of 5 Posts
If you have a fairly good band saw, this is a simple thing to do with a circle cutting jig. You can cut the circle on the table saw, but not the concave curve for the straight boards.

Google or search circle jig for bandsaw and you will see how simple it is. Joning the boards is no big deal, you would break the wood before you break the glue line with modern glues.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.