Need recommendation for cutting board feet

i always get the clear ones, not sure why, but they are between size of dime and nickle. never used the ones with the washer, probably cause i use hand screw driver to tighten and not a power one.
anything works, size on this item imo does not matter.
rj in az

i always get the clear ones
rj in az

- Knockonit

Click to expand...

Got a link you could share? Thanks.

Mostly depends on the size of the board you re building, I use "these 1 feet for boars in the 12"x18" size and go with slightly larger 1.25 feet for boards in the 16"x24" size.

- ChefHDAN

Click to expand...

Thanks ChefHDAN, I already have some others on the way, but went ahead and placed an order for the 1" ones you recommended as well.

-Jon

Set the saw for 12"

(attempt at humor)

Most wild male pigs (boars) have four feet - another attempt at humor.

@ChefHDAN Thanks again for your suggestion. The 1" ones are way better than the other ones (which were tiny) that I had ordered.

Will take pics and post tomorrow.

Jon,
That's what the LJ nation is all about, cant tell you how many times I think I've got something figured out only to run it up the flagpole here and get great advice.

Kind of late for the OP, but I always include these with my cutting boards. Able to use both sides of board, and the silicone grips the countertop well. The link below is for the black / white, but they also sell red / green at nearly twice the price.

https://www.amazon.com/Dreamfarm-Chobs-2-Inch-Board-Protectors/dp/B004I8V8CE

the hard rubber doesn't make it here in the az heat, even in the kitchen, some get ratty and leave marks on counters, had a gal leave some streaks on her white quartz top, blamed a worker, then showed her the bread box shes kept things in had old black feet,
goodluck, i generally use the clear silicone jobbies, tried to find the link, but alas, i'm slow and ignorant of pooter science
Rj in az

Here is where I get mine. Lots of options, made in USA.