LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.
1 - 5 of 5 Posts

·
Registered
Joined
·
383 Posts
Hi,
My pride just took a hit…
After having adjusted the fence, I start making a few cuts (90•) - all good.
But just after a few cuts, I am off .5•.
Been fooling around with it for 2 hours….

- Blade alignment is within 1 thou
- Work piece is properly clamped
- No movement of the sleigh
- Miter gage solidly locked…

I just can't see why…

Thanks for your help!
 

·
Registered
Joined
·
10,887 Posts
Does it lock similar to a 1000hd?

Do you think you might've locked it down a hair off 90? Which is your true 90 and it slipped all the way into the detente?
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top