LumberJocks Woodworking Forum banner

Need help squaring up cross cut sled.

1794 Views 19 Replies 13 Participants Last post by  TheWoodenOyster
I don't know how this is possible.

I'm getting square to the right side of the kerf cut and way off square on the left side of the kerf cut.

see the pix

Wood Rectangle Wood stain Hardwood Tints and shades

Wood Rectangle Flooring Floor Wood stain


See less See more
1 - 6 of 20 Posts
That is what I thought, but It's hard maple and it looks straight, when I lay it flat there is no wobble or movement.
Yep, it's the fence. Its a tad bit curved, I see it now.

There is a bit of light through the middle area but the square touches on the right side and the left side.

I'll look into that finished grade ply.
What square do you recommend?
no, its pure hard maple.

I glued the new one in, so far its measuring up a whole lot truer

I'm letting it glue overnight and then I'll test it in the morning.
Thank you! For the William Ng's video.

My word was that ever helpful!
1 - 6 of 20 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.