LumberJocks Woodworking Forum banner

Need 3D printer jock

513 Views 3 Replies 4 Participants Last post by  HowardInToronto
Hello Lumberjocks,

I am working on a project that needs some small 3D printed items.

I have been working on this project for about a year and I have finally determined that a couple of printed parts would be the best way to finish this project.

I will gladly pay or trade for time and material!

Message me if you are willing to help.

Hans, a.k.a. oldnovice
1 - 4 of 4 Posts
Hey Hans, You need to be forthcoming about what you need. If we know what you need, it makes it easier for the community to figure out who can help you best.
I've got a 3d printer. What do you need? 6×6x6 is my max build volume. PLA/PLA+ only. Do you have an .STL file? Have you drawn it inTinkerCAD? Do you have a dimensioned sketch?
Have you tried public libraries in your area?

Here in Ontario, Canada, Most public libraries have 3D printers available to their card holding patrons.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.