LumberJocks Woodworking Forum banner
1 - 1 of 1 Posts

· Registered
557 Posts
Doors and Drawers

I would have waited until I made more progress until posting this next one, but since I have been stuck in bed with the flue for three days (and I am good for nothin' in the shop) I may as well post what I've got. The following was done before I got sick.

I am keeping the joinery as simple as possible on this project. I want it to look nice but it mostly needs to be functional. So I used simple grooved "style and rails" for the doors and drawer fronts, with more of that birch ply in for the panels. This way I can just glue the whole thing up and not even have to think about wood movement. I would rather use the time that it would take to do something fancier on another project. This phase of the project was pretty quick.

Here are the styles and rails milled and cut to size:

Here I have cut the grove with a dado blade to accept the plywood:

Making sure everything fits:

Here everything is laid out and ready for assembly:

But wait! Why didn't I just glue 'em up? Well it turns out that in my haste to just get this thing done I made the groves a little too narrow for the plywood to fit without crumpling the birch veneer on the edges. So, measure twice, cut once, right? Well if I widen the grove the rails won't fit the styles. So My only option is to trim a little thickness off the edges of the plywood. Oh well, no big deal.

So when I get to feeling better I will complete that last step and glue the darned things up. Thanks for tuning in.
I have no doubt that we would never have known it happened once you take care of it. Looking really good Blake and thanks for blogging this.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.