LumberJocks Woodworking Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
157 Posts
The rolling cart is a good idea.

I would also suggest positioning all of your wall cabinets so the tops are at the same position. Then, you can lay boards on top of the cabinets. This could potentially give you at least 12" of space all the way around your shop.

If you have a storage shed, you could obviously put wood in there. However, if there's not enough room, you could build an "addition" onto your shed that is enclosable. Something where you can lay boards flat and slide them in and out from an access door. This could also be built on the side of your house. Put a small inclined roof on it so water is shed away.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top