LumberJocks Woodworking Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
1,122 Posts
Overhead would be good if you're not dealing with full sheets of 3/4 ply or MDF, otherwise you'd probably be crushed trying to get them down. I currently have mine stored on the side. It works well as long as the ply can be stacked tightly. If it is allowed to lean it will bend.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top