LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.
1 - 5 of 5 Posts

·
Registered
Joined
·
159 Posts
Hello all. I recently bought the Jorgenson bench vise. When I release the board from the vise, it is loose on the right side and still a little tight on the left side. Is there a way to adjust the vise? I thought about planing off the wooden inserts a little off the face of the left side but with a $200 vise you shouldn't really have to do that. So is that a big deal? Should I return the vise and try another one or just plane a little off on the left side? Thanks.
 

·
Registered
Joined
·
2,379 Posts
Did the vise come with, or did you buy, or make the wooden inserts?

Reason I ask, is if you take them off and just use bare metal, does it still happen? Could be the inserts are off a little bit.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top