LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.
1 - 3 of 3 Posts

·
Registered
Joined
·
13 Posts
I just spent many hours trying to correct a excessive drift to the left and it turned out to be a bad blade. During this setup I see that my bottom wheel need to be moved out about 3/16" for the blade to run in the center of the tire. Does anyone know if this can be done. I filled out a feedback form on Jet's website but have not gotten anything back.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top