LumberJocks Woodworking Forum banner

ISO: Greater Toledo OH Hardwood Supplier

577 Views 8 Replies 6 Participants Last post by  stevesawdust
In search of a rough sawn hardwood supplier in the greater Toledo area, as well as a reliable plywood source. Just moved to Ohio from the mid Atlantic and setting up a new shop, looking to establish some local contacts, and pull together materials for the usual shop setup projects (Outfeed and assembly table, mitre station, storage cabinets, etc...) so Birch Ply, MDF, Hard Maple, some Poplar and the like are first on my list. Let me know if anyone has recommendations for this part of the world.
1 - 2 of 9 Posts
Kencraft for hardwood and Toledo Plywood for sheet goods are on North Westwood just south of Dorr. North Westwood is named Douglas north of Dorr. I drive down from Michigan to get materials for both of them.
  • Like
Reactions: 1
Johnson’s Workbench in Charlotte Michigan is not far. They have a good selection of domestic and exotic wood.
Johnson's Workbench is a great place, very friendly staff and huge selection of rough cut lumber (including exotics) in 6 barns. The inside store has most all the species milled to a thickness/width/length for a higher price than rough cut. A Rockler store is on-site also in showroom. They offer jointer/planer service for your purchase to thickness at $0.25 a board foot, minimum $25. They will also sand to thickness. Will rip one edge, but not rip to width. They are 2 hours and 125 miles from Toledo.
1 - 2 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.