LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.
1 - 7 of 7 Posts

·
Registered
Joined
·
11,866 Posts
It's a good saw for the right price. It has 10" wheels
and blades tend to work harden and break. I deal
with the issue by cutting and soldering up my own
blades. They're pretty cheap that way and soldering
is much quicker and easier than skeptics imagine.
I use flat silver solder alloy and a jig to hold the
scarfed ends in alignment. About 20 seconds with
a propane torch is all it takes.
 

·
Registered
Joined
·
11,866 Posts
With due respect, the INCA is in a whole other class
from other 3 wheeled woodworking band saws. They
were designed and made in Switzerland until
production moved to France. The saw weighs about
170 lb. of injection cast aluminum with precision
balanced wheels, 3 speed transmission and ball
bearing blade guides.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top