John;
Thanks for the well done shop tour. You have a great layout to be creative with. Have the same Rikon bandsaw and it is one of my most used tools after my table saw.
Looking forward to more projects from this excellent shop.
In the Shop
Grandpa's RAS gets a new top
Instead of adding a new project for the things I do around the shop, I thought I would start a blog about the upgrades as I make them. Over the past two years I have done a lot to convert the unfinished part of my basement into a woodworking shop. If you want to see some before shots you can visit the bt3central forums (probably need to register to see pics, sorry i'll post them here soon)
The beginning
Upgrade 1
You can see what it looks like now in My Workshop in my profile…
Anyway, the point of this first blog entry was to showcase the new top I put on the radial arm saw I inherited from my Grandpa. Until today I have used it as received but realized that the top was pretty chewed up and if I wanted to clean cuts without chip out I needed to start with a clean slate. I used 3/4" hardwood ply and a 1.5" jointed ash fence. I also extended it deeper, behind the post than the original to make it easier to attach a dust collection hood (in progress). After replacing the top, I tuned it up and now get beautiful cross cuts. I haven't messed around with 45 degree cuts or bevel cuts but with my table saw and some jigs, I may dedicate this for cross cuts for now.
Before
![Wood Flooring Floor Gas Hardwood]()
After:
![Wood Automotive tire Floor Flooring Hardwood]()
Thanks for looking.
Instead of adding a new project for the things I do around the shop, I thought I would start a blog about the upgrades as I make them. Over the past two years I have done a lot to convert the unfinished part of my basement into a woodworking shop. If you want to see some before shots you can visit the bt3central forums (probably need to register to see pics, sorry i'll post them here soon)
The beginning
Upgrade 1
You can see what it looks like now in My Workshop in my profile…
Anyway, the point of this first blog entry was to showcase the new top I put on the radial arm saw I inherited from my Grandpa. Until today I have used it as received but realized that the top was pretty chewed up and if I wanted to clean cuts without chip out I needed to start with a clean slate. I used 3/4" hardwood ply and a 1.5" jointed ash fence. I also extended it deeper, behind the post than the original to make it easier to attach a dust collection hood (in progress). After replacing the top, I tuned it up and now get beautiful cross cuts. I haven't messed around with 45 degree cuts or bevel cuts but with my table saw and some jigs, I may dedicate this for cross cuts for now.
Before
After:
Thanks for looking.
Attachments
1 - 1 of 70 Posts
1 - 1 of 70 Posts
