LumberJocks Woodworking Forum banner
1 - 7 of 7 Posts

· Registered
Joined
·
7,027 Posts
use a heat gun and a paint scraper with the right size and for the thight corners use a cheap
cheisel with plastic handle …. :) ........ if the damm colour is oilbased if its waterbased
you still do it with paintscraper and cheisel but the heatgun is useless then ….. try by error :-(

the chemicals works on what they are made for :)

good luck Randy

Dennis
 

· Registered
Joined
·
7,027 Posts
ok then its time to drag out the axe and have some fun making firewood :)
and if you still in the mood for manuel work a shave horse a draw knife and
brace with bits is nearly all you need to make a new cradle a la windsor chair

Dennis
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top