LumberJocks Woodworking Forum banner

I need advise about I minimally need to sharpen my chisels and plane irons

3K views 22 replies 12 participants last post by  CharlesA 
I hope I'm not muddying the water more, but I use an 8" grinder to hollow grind and go straight to a fine stone. In my opinion its quicker, easier and cheaper and does just as good of a job.

the other advantage is hollow grinding makes it easier to eliminate the need for the jig when you get confident enough.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top