LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.
1 - 5 of 5 Posts

·
Registered
Joined
·
222 Posts
I have between 60 and 80 drawer slides to install. The boxes will be made of plywood and MDF and the cabinets are made of particle board. I plan on using 5/8" #6 philip head screws.
Is ther one screw that will work in both Particle board and MDF?
Where is a good place to get a good screw at a fair price?
I was going to install 5 screws on each side of the box slide and 5 screws on each cabinet slide for a total of 20 screw/ drawer or sliding shelf.

Thank for the help.
 

·
Registered
Joined
·
1,861 Posts
I would use a Robertson screw head… less chance of slipping and stripping the screw. Just my 2 cents.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top