LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.
1 - 1 of 1 Posts

· Registered
Joined
·
414 Posts
Here is an email I received from Holbren:

Holbren Brand Router Bits - Remaining Inventory Blowout!!
Well folks, this is the last of our inventory for the Holbren brand of router bits.

These are the same bits that Fine Woodworking tested in their last review giving them a "good" rating beating Grizzly, MLCS, Porter Cable and Woodline on the quality of cut overall average.

We've priced these bits to go and all single bits are no more than $5 including 3/4" and 1" radius roundover bits, rail & stile sets at $10 and a host of other items.

Quantities are very limited, as little as one on some items, so move fast.

Click for Product Listing

To find the products available, use the search by manufacturer feature on our home page selecting "Holbren"

When items sell out, they will drop off the list. So, if you don't see it, it's not available.

At $5 a bit and $20 for a 3-Piece Cove Raised Panel Set With Back Cutter 1/2" Shank, it would be hard to go wrong. Even if it were to wear out quickly, cut per $$$ should make it worthwhile.

Jim
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top