LumberJocks Woodworking Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
707 Posts
Here's my 2 cents, almost all spray cans are lacquer based, therefore you have put a lacquer finish on the wood, and a clear lacquer finish should top it. I have however ran into a few water based spray cans but they are usually labeled very clearly water base. If it dryed very fast and smelled harsh it was probably lacquer, poly will not lay over lacquer for very long.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top