LumberJocks Woodworking Forum banner
1 - 5 of 5 Posts

· Registered
Joined
·
4 Posts
Hi All,
I picked up a 113.299410 that was in "OK" shape, already cleared the rust paint and glue that was on the surfaces, picked up an OEM blade guard/splitter (original was missing). It came with an upgraded fence, which I've already tuned up, but getting ready to tune the saw it'self and I don't have the manual, nor have I been able to find one online. I've already contacted SearsPartsDirect.com, and a brick and mortar sears store o try to find one, and both came back with a no.
Does anyone else have one? Anyone have one that is close enough to the 299410 that it would work? Also need to know the year and "true" manufacturer of the saw, as I wanted to pick up the PALS for it, and some replacement zero clearance inserts.

Thanks,
Bob

Some Pics…

The attached Router table
https://i.imgur.com/AOrUYLx.jpg
Post re-finish (After paste wax)
https://i.imgur.com/odPt0Am.jpg
https://i.imgur.com/tGCw7J3.jpg
What the top looked like before the refinish:
https://i.imgur.com/yCcJ6Vy.jpg
https://i.imgur.com/arYfltl.jpg
During the refinish:
https://i.imgur.com/680zWOg.jpg
https://i.imgur.com/yCcJ6Vy.jpg
 

· Registered
Joined
·
18,411 Posts
JCamp's link is for a 44 page owner's manual. It has instructions for all necessary adjustments.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top