LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.
1 - 1 of 1 Posts

·
Registered
Joined
·
5,163 Posts
Rick, it sounds to me like you need to raise your router bit to clear the sled. If you can't get enough height from your current router set-up, you might want to add a collet extension to your router. Here is one from MLCS and runs about $30.00.

By the way if you have not seen it, Mark Spagnolo produced an informative video, Raising Arizona, that is a pretty good tutorial on making a raised panel door with cope and rail bits.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top