LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.
1 - 6 of 6 Posts

·
Registered
Joined
·
8,052 Posts

·
Registered
Joined
·
3,004 Posts
Mike Excellent review of the HF belt sander, pictures, and homemade jigs. Might look at these Alumina Zirconia (very hard, sharp grain) Planer belts while not the cheapest around think will be happy with the results. If scroll down will see can buy your favorite grit belt. If happy with belts using now stick with them.

http://www.woodworkingshop.com/product/pl00436/

I'll stick with my old 6" Craftsman grinder with friable grinding wheels and Wolverine system & Vari grind jig been using for over twenty years. By the way, paid about $59.95 back then for that grinder. I started out free hand sharpening my tools on a Craftsman belt sander and still have it.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top