LumberJocks Woodworking Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
166 Posts
Bench Almost Complete

More bench progress…

Here is the "tail" vice mortised into the end of the bench. You can also see how the underside of the bench looks with all the different widths I used:

P1010011

Clamping on the wider "apron" pieces front and back:

P1010006

And adding the end aprons with dowels:

P1010007

P1010008

P1010009

P1010010

As you can see I painted the 4×6 fir base black:

P1010030

I leveled the table with shims under the feet and then bolted the legs to the floor:



And then the fun part began…

P1010012

P1010014

I routed the edges of my vice jaws on the router table:

P1010018

P1010020

The vices came out really nicely. I made the tail vice so it would span across the entire width of the bench. That way I could have bench dogs along both edges of the bench for wide clamping.

P1010021

P1010023

Nearly complete… now all I have to do is add the dog holes, and a little sanding/finishing. I actually made it to the Sacramento Woodworking Show on Sunday and picked up some brass Veritas bench dogs.

P1010027

I think it looks really good with the black base.

P1010025

(See all the shavings on the floor!)

UPDATE:

Here are the links to the finished bench and cabinet in my projects:

Looks really good, nice color on the base. How thick is the top, square or round holes?
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top