LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.
1 - 2 of 2 Posts

·
Registered
Joined
·
443 Posts
Discussion Starter · #1 ·
Green and yellow tractor rear axle wheel nuts

Wood Table Plastic bottle Water bottle Road surface


Gas Lego Toy Electric blue Plastic


Wood Natural material Composite material Plywood


Wood Art Font House numbering Sculpture


Wood Tool String instrument Shadow Broadaxe


My axel is a 7/8th in allthread bolt that I took out of an electrical high line structure(Tear down) when I was a lot younger.. My wheel nuts i hand made(a lot of hand work) from the square nuts used on the pole structures. On the 4th photo you will see the roll of masking tape. It was what I used for the radiuses for the cut outs. The wood was clamped into the threads of the bolt plus a little epoxy.
Table Wood Gas Circle Tire


Automotive tire Road surface Wood Asphalt Gas


Automotive tire Road surface Wood Asphalt Gas


I put a couple of coats of clear coat on the made nuts and use lock tite(blue) to hold them in place.
Art paint Paint Art Rectangle Wood


This is my paint station. The green tint is covering up the yellow tint from my Cat models.
Wood Rectangle Motor vehicle Machine Plywood


The 1/4×20 seen on the ends of the axle are for attaching fenders and different tool attachments . I used self locking nuts so they will not be lost. The long all thread is to attach the axle to the main body later.
Green Wood Gas Machine Motor vehicle


Automotive tire Tire Gas Automotive wheel system Machine

These photos show the axle attached to the main body. Enjoy.
 

Attachments

·
Premium Member
Joined
·
28,515 Posts
amazing detailed work !!!
 

Attachments

1 - 2 of 2 Posts
Top