LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.
1 - 5 of 5 Posts

·
Registered
Joined
·
224 Posts
I want to glue 8/4 X 24" X 7" hickory to 4/4 X 24" X 7" walnut face to face. Are there any issues I should be aware of? I'm not sure if the expansion rates of the two woods will cause issues over time. Thanks for your feedback.
 

·
Registered
Joined
·
224 Posts
Discussion Starter · #4 ·
The hickory is dry and they are both cut the same - Thanks for the feedback, I appreciate it. I 'thought' it would be ok - but my thought is, when in doubt, dig deeper, check with the experts. The finished piece of wood is to be used as the outside surface of the vise(s) I'm installing on the workbench I've been making for my son.

Wood Rectangle Hardwood Wood stain Composite material
 

Attachments

1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top