LumberJocks Woodworking Forum banner
61 - 80 of 460 Posts

· Registered
Joined
·
4,124 Posts
Discussion Starter · #61 ·
Uncle Stumpy asked if I had any projects yet? LOL!

This is what I told him….

I am moving forward and backwards at the same time. Got a challenge from a friend who I had challenged awhile ago. He is through his angst and has sold a major painting, plus others. He said "just go out and play with the wood." I agreed. Then the electrical inspector called asking if I had finished yet? That became my priority. Finished it and made a major mistake which he has had me correct.

Yesterday I finished putting together some concrete pads. Had to adjust for a very crooked concrete floor. Will be building a large shelf to put my crap on.

I had gone to my shop to play with the wood and couldn't find a place to DO anything! Dangerous as well?

Probably another week as I will be seeing the few clients I have (psychology) and after all that, and before finishing assembly of my jointer/planer, floor drill press, and delta dust collector…...I have a piece of ash that has dried and checked that I will make a sitting stool when feeding my outside/and barn cats.

Have a title for when I post it…"Sitting on my ash!"

Gotta call the electrical inspector to get him to sign off.

No simple answers.

Tom/akaDocSavage45
 

· Registered
Joined
·
19,720 Posts
Uncle Stumpy asked if I had any projects yet? LOL!

This is what I told him….

I am moving forward and backwards at the same time. Got a challenge from a friend who I had challenged awhile ago. He is through his angst and has sold a major painting, plus others. He said "just go out and play with the wood." I agreed. Then the electrical inspector called asking if I had finished yet? That became my priority. Finished it and made a major mistake which he has had me correct.

Yesterday I finished putting together some concrete pads. Had to adjust for a very crooked concrete floor. Will be building a large shelf to put my crap on.

I had gone to my shop to play with the wood and couldn't find a place to DO anything! Dangerous as well?

Probably another week as I will be seeing the few clients I have (psychology) and after all that, and before finishing assembly of my jointer/planer, floor drill press, and delta dust collector…...I have a piece of ash that has dried and checked that I will make a sitting stool when feeding my outside/and barn cats.

Have a title for when I post it…"Sitting on my ash!"

Gotta call the electrical inspector to get him to sign off.

No simple answers.

Tom/akaDocSavage45
A little progress at a time buddy, before you know it you will be out there in the shop making Bombe chest by the dozens.
 

· Registered
Joined
·
4,124 Posts
Discussion Starter · #63 ·
Uncle Stumpy asked if I had any projects yet? LOL!

This is what I told him….

I am moving forward and backwards at the same time. Got a challenge from a friend who I had challenged awhile ago. He is through his angst and has sold a major painting, plus others. He said "just go out and play with the wood." I agreed. Then the electrical inspector called asking if I had finished yet? That became my priority. Finished it and made a major mistake which he has had me correct.

Yesterday I finished putting together some concrete pads. Had to adjust for a very crooked concrete floor. Will be building a large shelf to put my crap on.

I had gone to my shop to play with the wood and couldn't find a place to DO anything! Dangerous as well?

Probably another week as I will be seeing the few clients I have (psychology) and after all that, and before finishing assembly of my jointer/planer, floor drill press, and delta dust collector…...I have a piece of ash that has dried and checked that I will make a sitting stool when feeding my outside/and barn cats.

Have a title for when I post it…"Sitting on my ash!"

Gotta call the electrical inspector to get him to sign off.

No simple answers.

Tom/akaDocSavage45
LOL! I do have Charles Neil's DVD for the Bombe box. ( Hey we've got a spelling checker! YEA!)
 

· Banned
Joined
·
2,577 Posts
Uncle Stumpy asked if I had any projects yet? LOL!

This is what I told him….

I am moving forward and backwards at the same time. Got a challenge from a friend who I had challenged awhile ago. He is through his angst and has sold a major painting, plus others. He said "just go out and play with the wood." I agreed. Then the electrical inspector called asking if I had finished yet? That became my priority. Finished it and made a major mistake which he has had me correct.

Yesterday I finished putting together some concrete pads. Had to adjust for a very crooked concrete floor. Will be building a large shelf to put my crap on.

I had gone to my shop to play with the wood and couldn't find a place to DO anything! Dangerous as well?

Probably another week as I will be seeing the few clients I have (psychology) and after all that, and before finishing assembly of my jointer/planer, floor drill press, and delta dust collector…...I have a piece of ash that has dried and checked that I will make a sitting stool when feeding my outside/and barn cats.

Have a title for when I post it…"Sitting on my ash!"

Gotta call the electrical inspector to get him to sign off.

No simple answers.

Tom/akaDocSavage45
Things never progress as fast as we would like them to when we look ahead…but before you know it they are done and we are looking back at what we have accomplished. I remember staring at the open grass out back and wondering if I would ever get my shop completed… that space is now my crowded workshop.
 

· Registered
Joined
·
20,030 Posts
Uncle Stumpy asked if I had any projects yet? LOL!

This is what I told him….

I am moving forward and backwards at the same time. Got a challenge from a friend who I had challenged awhile ago. He is through his angst and has sold a major painting, plus others. He said "just go out and play with the wood." I agreed. Then the electrical inspector called asking if I had finished yet? That became my priority. Finished it and made a major mistake which he has had me correct.

Yesterday I finished putting together some concrete pads. Had to adjust for a very crooked concrete floor. Will be building a large shelf to put my crap on.

I had gone to my shop to play with the wood and couldn't find a place to DO anything! Dangerous as well?

Probably another week as I will be seeing the few clients I have (psychology) and after all that, and before finishing assembly of my jointer/planer, floor drill press, and delta dust collector…...I have a piece of ash that has dried and checked that I will make a sitting stool when feeding my outside/and barn cats.

Have a title for when I post it…"Sitting on my ash!"

Gotta call the electrical inspector to get him to sign off.

No simple answers.

Tom/akaDocSavage45
As long as progress is being made and you're happy.
 

· Registered
Joined
·
215 Posts
Uncle Stumpy asked if I had any projects yet? LOL!

This is what I told him….

I am moving forward and backwards at the same time. Got a challenge from a friend who I had challenged awhile ago. He is through his angst and has sold a major painting, plus others. He said "just go out and play with the wood." I agreed. Then the electrical inspector called asking if I had finished yet? That became my priority. Finished it and made a major mistake which he has had me correct.

Yesterday I finished putting together some concrete pads. Had to adjust for a very crooked concrete floor. Will be building a large shelf to put my crap on.

I had gone to my shop to play with the wood and couldn't find a place to DO anything! Dangerous as well?

Probably another week as I will be seeing the few clients I have (psychology) and after all that, and before finishing assembly of my jointer/planer, floor drill press, and delta dust collector…...I have a piece of ash that has dried and checked that I will make a sitting stool when feeding my outside/and barn cats.

Have a title for when I post it…"Sitting on my ash!"

Gotta call the electrical inspector to get him to sign off.

No simple answers.

Tom/akaDocSavage45
As you do, I also have the title for my project in place well before I actually complete the work. For my snake chair I was also going to play on the words asp, ash and as…. Good luck with the electrical inspector. Prior to retirement I worked for Ontario's electrical inspection agency.
 

· Registered
Joined
·
4,124 Posts
Discussion Starter · #67 ·
Uncle Stumpy asked if I had any projects yet? LOL!

This is what I told him….

I am moving forward and backwards at the same time. Got a challenge from a friend who I had challenged awhile ago. He is through his angst and has sold a major painting, plus others. He said "just go out and play with the wood." I agreed. Then the electrical inspector called asking if I had finished yet? That became my priority. Finished it and made a major mistake which he has had me correct.

Yesterday I finished putting together some concrete pads. Had to adjust for a very crooked concrete floor. Will be building a large shelf to put my crap on.

I had gone to my shop to play with the wood and couldn't find a place to DO anything! Dangerous as well?

Probably another week as I will be seeing the few clients I have (psychology) and after all that, and before finishing assembly of my jointer/planer, floor drill press, and delta dust collector…...I have a piece of ash that has dried and checked that I will make a sitting stool when feeding my outside/and barn cats.

Have a title for when I post it…"Sitting on my ash!"

Gotta call the electrical inspector to get him to sign off.

No simple answers.

Tom/akaDocSavage45
Peter: The irony is not wasted on me…LOL,
Monte: Not HAPPY yet but seeing that I am getting there relives my stress.
Greg; My concern is my shop is too full of stuff ( being polite, LOL)

Thanks for your support.

My friend Mark said "play with the wood." My wife said "do what you know until you learn the new equipment'

I am listening. Inspector coming this afternoon.
 

· Registered
Joined
·
337 Posts
Uncle Stumpy asked if I had any projects yet? LOL!

This is what I told him….

I am moving forward and backwards at the same time. Got a challenge from a friend who I had challenged awhile ago. He is through his angst and has sold a major painting, plus others. He said "just go out and play with the wood." I agreed. Then the electrical inspector called asking if I had finished yet? That became my priority. Finished it and made a major mistake which he has had me correct.

Yesterday I finished putting together some concrete pads. Had to adjust for a very crooked concrete floor. Will be building a large shelf to put my crap on.

I had gone to my shop to play with the wood and couldn't find a place to DO anything! Dangerous as well?

Probably another week as I will be seeing the few clients I have (psychology) and after all that, and before finishing assembly of my jointer/planer, floor drill press, and delta dust collector…...I have a piece of ash that has dried and checked that I will make a sitting stool when feeding my outside/and barn cats.

Have a title for when I post it…"Sitting on my ash!"

Gotta call the electrical inspector to get him to sign off.

No simple answers.

Tom/akaDocSavage45
Good on ya Tom. You will get there and it is a pain working in a mess (I Know!)
I had a bit of a weekend sharpening tools and on my Ash a bit too. he he.
 

· Registered
Joined
·
4,010 Posts
Uncle Stumpy asked if I had any projects yet? LOL!

This is what I told him….

I am moving forward and backwards at the same time. Got a challenge from a friend who I had challenged awhile ago. He is through his angst and has sold a major painting, plus others. He said "just go out and play with the wood." I agreed. Then the electrical inspector called asking if I had finished yet? That became my priority. Finished it and made a major mistake which he has had me correct.

Yesterday I finished putting together some concrete pads. Had to adjust for a very crooked concrete floor. Will be building a large shelf to put my crap on.

I had gone to my shop to play with the wood and couldn't find a place to DO anything! Dangerous as well?

Probably another week as I will be seeing the few clients I have (psychology) and after all that, and before finishing assembly of my jointer/planer, floor drill press, and delta dust collector…...I have a piece of ash that has dried and checked that I will make a sitting stool when feeding my outside/and barn cats.

Have a title for when I post it…"Sitting on my ash!"

Gotta call the electrical inspector to get him to sign off.

No simple answers.

Tom/akaDocSavage45
HEY TOM, IT LOOKS LIKE YOU PROGRESSED A FEW FEET FORWARD, THEN SLIPPED ON SOME KITTY POO AND THEN BACK ABOUT 4 FEET..opps i hate when i accidently type in caps…sorry…not yelling…....i mean why should i yell, should i lay on the couch and figure it out…it might turn into a nap…..so this is what i think, you were doing good and making progress but then you had a cat ass tro fee..and it all went into a ball of fur…..im a little short on sleep , so my disclaimer is , nothing i say here am i accountable for…so the main question is, are you going to make anything..i will wait for part 2 here to see what develops…
 

· Registered
Joined
·
4,010 Posts
Uncle Stumpy asked if I had any projects yet? LOL!

This is what I told him….

I am moving forward and backwards at the same time. Got a challenge from a friend who I had challenged awhile ago. He is through his angst and has sold a major painting, plus others. He said "just go out and play with the wood." I agreed. Then the electrical inspector called asking if I had finished yet? That became my priority. Finished it and made a major mistake which he has had me correct.

Yesterday I finished putting together some concrete pads. Had to adjust for a very crooked concrete floor. Will be building a large shelf to put my crap on.

I had gone to my shop to play with the wood and couldn't find a place to DO anything! Dangerous as well?

Probably another week as I will be seeing the few clients I have (psychology) and after all that, and before finishing assembly of my jointer/planer, floor drill press, and delta dust collector…...I have a piece of ash that has dried and checked that I will make a sitting stool when feeding my outside/and barn cats.

Have a title for when I post it…"Sitting on my ash!"

Gotta call the electrical inspector to get him to sign off.

No simple answers.

Tom/akaDocSavage45
news flash, i just had this idea, why dont you commision me to make something for you and you can then claim that you made it….we wont tell anyone…..LOL…..ok im going out to the shop…im making progress on the coffin…at this rate i might need it sooner then later….....]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
 

· Registered
Joined
·
4,124 Posts
Discussion Starter · #71 ·
Uncle Stumpy asked if I had any projects yet? LOL!

This is what I told him….

I am moving forward and backwards at the same time. Got a challenge from a friend who I had challenged awhile ago. He is through his angst and has sold a major painting, plus others. He said "just go out and play with the wood." I agreed. Then the electrical inspector called asking if I had finished yet? That became my priority. Finished it and made a major mistake which he has had me correct.

Yesterday I finished putting together some concrete pads. Had to adjust for a very crooked concrete floor. Will be building a large shelf to put my crap on.

I had gone to my shop to play with the wood and couldn't find a place to DO anything! Dangerous as well?

Probably another week as I will be seeing the few clients I have (psychology) and after all that, and before finishing assembly of my jointer/planer, floor drill press, and delta dust collector…...I have a piece of ash that has dried and checked that I will make a sitting stool when feeding my outside/and barn cats.

Have a title for when I post it…"Sitting on my ash!"

Gotta call the electrical inspector to get him to sign off.

No simple answers.

Tom/akaDocSavage45
Might even make some functional stuff for animals? But I understand that that market may not be lucrative right now.

Hey quit stealing my ash jokes! LOL!

Grizz I understand you are a tired coffin builder. The first piece I will make is a butt seat for feeding the cats as my knees are getting older.
 

· Registered
Joined
·
4,124 Posts
Discussion Starter · #72 ·
Uncle Stumpy asked if I had any projects yet? LOL!

This is what I told him….

I am moving forward and backwards at the same time. Got a challenge from a friend who I had challenged awhile ago. He is through his angst and has sold a major painting, plus others. He said "just go out and play with the wood." I agreed. Then the electrical inspector called asking if I had finished yet? That became my priority. Finished it and made a major mistake which he has had me correct.

Yesterday I finished putting together some concrete pads. Had to adjust for a very crooked concrete floor. Will be building a large shelf to put my crap on.

I had gone to my shop to play with the wood and couldn't find a place to DO anything! Dangerous as well?

Probably another week as I will be seeing the few clients I have (psychology) and after all that, and before finishing assembly of my jointer/planer, floor drill press, and delta dust collector…...I have a piece of ash that has dried and checked that I will make a sitting stool when feeding my outside/and barn cats.

Have a title for when I post it…"Sitting on my ash!"

Gotta call the electrical inspector to get him to sign off.

No simple answers.

Tom/akaDocSavage45
Andy,

I see you working in your home shop. And I say "I can do it." LOL
 

· Registered
Joined
·
1,833 Posts
Uncle Stumpy asked if I had any projects yet? LOL!

This is what I told him….

I am moving forward and backwards at the same time. Got a challenge from a friend who I had challenged awhile ago. He is through his angst and has sold a major painting, plus others. He said "just go out and play with the wood." I agreed. Then the electrical inspector called asking if I had finished yet? That became my priority. Finished it and made a major mistake which he has had me correct.

Yesterday I finished putting together some concrete pads. Had to adjust for a very crooked concrete floor. Will be building a large shelf to put my crap on.

I had gone to my shop to play with the wood and couldn't find a place to DO anything! Dangerous as well?

Probably another week as I will be seeing the few clients I have (psychology) and after all that, and before finishing assembly of my jointer/planer, floor drill press, and delta dust collector…...I have a piece of ash that has dried and checked that I will make a sitting stool when feeding my outside/and barn cats.

Have a title for when I post it…"Sitting on my ash!"

Gotta call the electrical inspector to get him to sign off.

No simple answers.

Tom/akaDocSavage45
Keep at it and breath…. I do the same thing… LOL Charles Neil video how cool!!!!!
 

· Registered
Joined
·
4,124 Posts
Discussion Starter · #74 ·
Uncle Stumpy asked if I had any projects yet? LOL!

This is what I told him….

I am moving forward and backwards at the same time. Got a challenge from a friend who I had challenged awhile ago. He is through his angst and has sold a major painting, plus others. He said "just go out and play with the wood." I agreed. Then the electrical inspector called asking if I had finished yet? That became my priority. Finished it and made a major mistake which he has had me correct.

Yesterday I finished putting together some concrete pads. Had to adjust for a very crooked concrete floor. Will be building a large shelf to put my crap on.

I had gone to my shop to play with the wood and couldn't find a place to DO anything! Dangerous as well?

Probably another week as I will be seeing the few clients I have (psychology) and after all that, and before finishing assembly of my jointer/planer, floor drill press, and delta dust collector…...I have a piece of ash that has dried and checked that I will make a sitting stool when feeding my outside/and barn cats.

Have a title for when I post it…"Sitting on my ash!"

Gotta call the electrical inspector to get him to sign off.

No simple answers.

Tom/akaDocSavage45
Good News. Electrical inspector passed my electrical work! TA,TA! Waiting for my cement pads to set up. Like waiting for water to boil. LOL!

Ken: Have known Charles for many years. I just can't afford to go to a workshop. Have most every video he has put out. Can't get the Townsend Clock build as he is only releasing it to members of his mastering woodworking classes.
 

· Registered
Joined
·
68 Posts
Uncle Stumpy asked if I had any projects yet? LOL!

This is what I told him….

I am moving forward and backwards at the same time. Got a challenge from a friend who I had challenged awhile ago. He is through his angst and has sold a major painting, plus others. He said "just go out and play with the wood." I agreed. Then the electrical inspector called asking if I had finished yet? That became my priority. Finished it and made a major mistake which he has had me correct.

Yesterday I finished putting together some concrete pads. Had to adjust for a very crooked concrete floor. Will be building a large shelf to put my crap on.

I had gone to my shop to play with the wood and couldn't find a place to DO anything! Dangerous as well?

Probably another week as I will be seeing the few clients I have (psychology) and after all that, and before finishing assembly of my jointer/planer, floor drill press, and delta dust collector…...I have a piece of ash that has dried and checked that I will make a sitting stool when feeding my outside/and barn cats.

Have a title for when I post it…"Sitting on my ash!"

Gotta call the electrical inspector to get him to sign off.

No simple answers.

Tom/akaDocSavage45
"Sitting on my ash" hahahahahaha I love that! Be well Tom!
 

· Registered
Joined
·
4,124 Posts
Discussion Starter · #76 ·
Uncle Stumpy asked if I had any projects yet? LOL!

This is what I told him….

I am moving forward and backwards at the same time. Got a challenge from a friend who I had challenged awhile ago. He is through his angst and has sold a major painting, plus others. He said "just go out and play with the wood." I agreed. Then the electrical inspector called asking if I had finished yet? That became my priority. Finished it and made a major mistake which he has had me correct.

Yesterday I finished putting together some concrete pads. Had to adjust for a very crooked concrete floor. Will be building a large shelf to put my crap on.

I had gone to my shop to play with the wood and couldn't find a place to DO anything! Dangerous as well?

Probably another week as I will be seeing the few clients I have (psychology) and after all that, and before finishing assembly of my jointer/planer, floor drill press, and delta dust collector…...I have a piece of ash that has dried and checked that I will make a sitting stool when feeding my outside/and barn cats.

Have a title for when I post it…"Sitting on my ash!"

Gotta call the electrical inspector to get him to sign off.

No simple answers.

Tom/akaDocSavage45
Benji,

Thanks for checking in. :)
 

· Registered
Joined
·
110 Posts
Uncle Stumpy asked if I had any projects yet? LOL!

This is what I told him….

I am moving forward and backwards at the same time. Got a challenge from a friend who I had challenged awhile ago. He is through his angst and has sold a major painting, plus others. He said "just go out and play with the wood." I agreed. Then the electrical inspector called asking if I had finished yet? That became my priority. Finished it and made a major mistake which he has had me correct.

Yesterday I finished putting together some concrete pads. Had to adjust for a very crooked concrete floor. Will be building a large shelf to put my crap on.

I had gone to my shop to play with the wood and couldn't find a place to DO anything! Dangerous as well?

Probably another week as I will be seeing the few clients I have (psychology) and after all that, and before finishing assembly of my jointer/planer, floor drill press, and delta dust collector…...I have a piece of ash that has dried and checked that I will make a sitting stool when feeding my outside/and barn cats.

Have a title for when I post it…"Sitting on my ash!"

Gotta call the electrical inspector to get him to sign off.

No simple answers.

Tom/akaDocSavage45
You are a Psychologist too? I am duly inpressed! I thought Doc was just a nickname.
Well, I have to get up off my ash and get busy!
 

· Registered
Joined
·
4,124 Posts
Discussion Starter · #78 ·
Uncle Stumpy asked if I had any projects yet? LOL!

This is what I told him….

I am moving forward and backwards at the same time. Got a challenge from a friend who I had challenged awhile ago. He is through his angst and has sold a major painting, plus others. He said "just go out and play with the wood." I agreed. Then the electrical inspector called asking if I had finished yet? That became my priority. Finished it and made a major mistake which he has had me correct.

Yesterday I finished putting together some concrete pads. Had to adjust for a very crooked concrete floor. Will be building a large shelf to put my crap on.

I had gone to my shop to play with the wood and couldn't find a place to DO anything! Dangerous as well?

Probably another week as I will be seeing the few clients I have (psychology) and after all that, and before finishing assembly of my jointer/planer, floor drill press, and delta dust collector…...I have a piece of ash that has dried and checked that I will make a sitting stool when feeding my outside/and barn cats.

Have a title for when I post it…"Sitting on my ash!"

Gotta call the electrical inspector to get him to sign off.

No simple answers.

Tom/akaDocSavage45
Yep and I hate the paperwork! The name I chose DocSavage45 is the duality of my nature, even though it is an old comic book hero. A doctor that kicks ASH!
 

· Registered
Joined
·
4,124 Posts
Discussion Starter · #79 ·
Still here!

Haven't posted in awhile re: my tools and shop. I have made progress and have shared that with a few LJ's. I have succeeded in getting through my electrical inspection and now have an approved box in the Cau Haus.

I ran metal conduit for my 220 single phase cabinet saw. Had some sticks of metal conduit from a project many years ago. Had to do some tricky(for me) bends and twists to get around ceiling joists and the metal gas pipe for the furnace. Of course I screwed it up! Brain function slows with age if it's not used in a particular area. Looked at some bend and tried to bend it on the floor. Backwards!

Good thing I had it inspected. Went to local Box Store and even checked out NEMA and still picked the wrong outlet! Eyes also diminish with age. I need glasses for close up! The electrical inspector was quite kind, as this was my third year..LOL! Been busy doing other things. he pointed out that I had chosen 110 plugs and outlet….GRRRR! Rewired my extension cord and the plug on the saw and the outlet. He put his stamp on the box! Sigh!

After that…looked around and found NO CLEAR SPACE TO WORK IN THE ENTIRE BUILDING!Set about to improve my safety, and create order. Built a floor to (low) ceiling shelf. It's plumb and level. Attached to support the floor joists for the second floor. Had to pour concrete footers to get the upright posts stable. Small pads take as long as knee walls!

Finished it last night. not square…but close enough…shelves. Started moving materials and tools onto the shelves. I have way too many gallons of exterior oil stain! Another story….

Will be cleaning up the benches and floors in the work area, after doing insurance billing for my psychology practice( I hate paperwork!)

And it's me and that piece of ash. It's sat for a long time in a dry space in winter for a few years now. I'm going to use a trick I learned from Charles Niel to remove them.

Hope to have some pictures and progress on an actual piece of furniture????? LOL

Thanks for following my babble.
 

· Registered
Joined
·
19,720 Posts
Still here!

Haven't posted in awhile re: my tools and shop. I have made progress and have shared that with a few LJ's. I have succeeded in getting through my electrical inspection and now have an approved box in the Cau Haus.

I ran metal conduit for my 220 single phase cabinet saw. Had some sticks of metal conduit from a project many years ago. Had to do some tricky(for me) bends and twists to get around ceiling joists and the metal gas pipe for the furnace. Of course I screwed it up! Brain function slows with age if it's not used in a particular area. Looked at some bend and tried to bend it on the floor. Backwards!

Good thing I had it inspected. Went to local Box Store and even checked out NEMA and still picked the wrong outlet! Eyes also diminish with age. I need glasses for close up! The electrical inspector was quite kind, as this was my third year..LOL! Been busy doing other things. he pointed out that I had chosen 110 plugs and outlet….GRRRR! Rewired my extension cord and the plug on the saw and the outlet. He put his stamp on the box! Sigh!

After that…looked around and found NO CLEAR SPACE TO WORK IN THE ENTIRE BUILDING!Set about to improve my safety, and create order. Built a floor to (low) ceiling shelf. It's plumb and level. Attached to support the floor joists for the second floor. Had to pour concrete footers to get the upright posts stable. Small pads take as long as knee walls!

Finished it last night. not square…but close enough…shelves. Started moving materials and tools onto the shelves. I have way too many gallons of exterior oil stain! Another story….

Will be cleaning up the benches and floors in the work area, after doing insurance billing for my psychology practice( I hate paperwork!)

And it's me and that piece of ash. It's sat for a long time in a dry space in winter for a few years now. I'm going to use a trick I learned from Charles Niel to remove them.

Hope to have some pictures and progress on an actual piece of furniture????? LOL

Thanks for following my babble.
Keep on trucking Tom,there's always set backs but it sounds like your fighting your way through them.You getting closer to having everything in order. I look forward to the photo's.
 
61 - 80 of 460 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top