LumberJocks Woodworking Forum banner

General Finishes Enduro Pre-Cat Urethane

16153 Views 59 Replies 11 Participants Last post by  DAWG
I am having trouble locating information about using this product on new wood. I plan to spray using a Rockler HVLP system like this.

I am looking for help in selecting tip size, what the film should look like right after spraying, etc.

Thanks for any help given.
1 - 2 of 60 Posts
This has been one of the most informative posts to date.

So am I sucking wind with my gravity feed Husky HVLP from HD, trying to spray water-based poly? I'm sure a Earlax 5000 would solve quite a bit of my problem, being able to change the size of the spray nozzle, pressure feed, easy to clean. I love to spray water-based poly but with my current set up it can be a real cluster F at times.

Also the finish sanding / buffing tips here are priceless. I can't wait to get some supplies and take my work to a new level. Thanks
All good info, I'll need to evaluate my situation, based on all this great information. With this information I'm sure I'll be able to make some good decisions. Thanks (I'll remember this as the day I discussed spraying water-based poly with Charles Neil)!
1 - 2 of 60 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.