Freud - 34-128 Quadra-Cut Roundover bit (Rating: 5)

I just ran 300 feet of 1.5 inch doug fir stair treads over a 3/4 inch Freud roundover bit on the router table to bullnose the work. I was very concerned about "tearout" as the old growth doug fir had a lot of tight knots in it. I had no tearout at all, and the I cut the bullnose in just 1 pass per side. The work is ready to install without any sanding. Great finnish. And almost no pitch buildup on the bit. This is the first Quadra-Cut bit that I have used, and I am impressed.