LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.
1 - 3 of 3 Posts

·
Registered
Joined
·
24 Posts
Will dump this in a few days - last chance for good hose

I have a couple of long pieces of 2 inch heavy duty industrial dust hose that I'm willing to give away to anyone who might need it.

Details.
Hose is 2" ID and 2-7/16" OD.
One piece is 17 feet long
Once piece is 21 feet long

This is a heavy industrial grade hose and was originally purchased for use in a metal grinding area. The ID is abrasive resistant to metal dust.
The hose is classified as flexible but it is difficult to get small bends less than about 18" radius unless clamped in a fixed position.
Not well suited if you need something very versatile that will be moved around a lot.
I have some I'm planning to use when I finish my new router table, porting a 4" duct to sever 2" hoses.

Would gladly give this to anyone in the Houston Texas area who could pick it up. (too bulky to ship)
I am in The Champions, near Willowbrook Mall.

You can take it all if you can use it, or cut off a few feet if that's all you need.
 

·
Registered
Joined
·
9,005 Posts
That's awfully generous of you, I too could use some, but from Ohio it wouldn't exactly be cost effective to get down there for some hose. I'm sure it'll work out great for someone.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top