LumberJocks Woodworking Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
361 Posts
For me joining panels is a question of intended application and the ratio of panel size to thickness. If the panels aren't too large compared to their thickness or if strength/rigidity isn't a huge issue, I'd just pocket screw the panels together on the inside (assuming it won't show). Otherwise, I'd also use an internal frame with glue and screws.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top