LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.
1 - 9 of 9 Posts

·
Registered
Joined
·
163 Posts
Hi
I'm working on a tv stand. I'm using mahogany plywood for the carcase and solid mahogany for the top, face, legs, and drawer fronts.
Problem… I'm not sure how to finish it.
On my other projects I've just used a few coats of Arm-r-Seal, and that has worked fine.
The mahogany I bought for this project seems noticeably lighter in color than what I've used before. A test of Arm-r-Seal on it just seems too light. I don't think the wife would approve of it - she demands something a little darker.

So, any suggestions? I like easy, one-step/one-product finishes.
How about Watco oil? If so, which color should I try in order to bring out the mahogany-ness?
 

·
Registered
Joined
·
667 Posts
hey spamfilterman,

Mahogany can be a little tricky. It depends on the openness of the grain. You may need to apply a grain filler before you final finish. My suggestion is to give Old Masters http://www.oldmastrs.com/ a call and talk to them. They can help and their products work very well.
 

·
Registered
Joined
·
88 Posts
Not sure how dark you are needing, but one trick I will sometimes use if I need to slightly darken mahogany is I will place it outside in direct sunlight. Of course you will want to be sure all machining and sanding is finished prior to doing so. To see how dark the wood will get, try it first with some scrap pieces by covering part of the wood so it doesn't get any sun. You might be surprised.

As far as finish, I usually just clear gloss polyurethane. To get a very smooth surface I'll do 3 or 4 coats, rubbing with #0000 steel wool after each but the final coat. Even after the poly, over time, the mahogany will continue to darken on its own.

Here are some before and after pics of my mahogany china cabinet. The poly alone will darken the wood. http://lumberjocks.com/projects/22361
 

·
Registered
Joined
·
163 Posts
Discussion Starter · #4 ·
Thanks jevarn71, maybe I'll leave a piece of scrap out tomorrow and see what happens.
I've tried just a coat of Arm-r-Seal, and it just didn't darken the wood enough.
I also tried a coat of Dark Walnut Watco oil, and it was just way too dark brown.
Maybe I'll try the Red Mahogany Watco next, but I hate to have to keep buying finishes that I'll probably never use again.
 

·
Registered
Joined
·
4,871 Posts
Just completed a couple of night stands, from African Mahogany-hardwood for the carcass and top; ply for the side panels.

Here's what they look like after:
- sanding to 320 grit
- two "flood coats" of Watco Danish Oil (Natural), applied with a foam brush
- one coat of Watco, applied with 400 grit wet/dry sandpaper
- two coats of paste wax, applied with 0000 steel wool





Good luck!
 

·
Registered
Joined
·
163 Posts
Discussion Starter · #8 ·
Thanks, I noticed that the 2 tops in your nightstands are different colors… is that just because the color of the wood varies that much?
I really like the color of the top on the left one, but I'd be really happy with either.
 

·
Registered
Joined
·
4,871 Posts
The finishing was done the exact same way, so … yup … it was the difference in the wood.

Here's a picture of the original stock from which the night stands were cut:



AND



I took my chances by using such dramatically different looking wood for the tops, but … kinda' like the way it turned out.

That may give you some idea of the effect that the Watco had. Incidentally, it was the "Natural" colored Watco-in theory, it didn't impart much color to the wood. That was my goal.

Have fun!
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top