LumberJocks Woodworking Forum banner
1 - 1 of 10 Posts

· Registered
5,234 Posts
Pat, don't mean to sound cheeky, but there's a reason the planer has a 4" port.

As you've already discovered, you just don't have enough CFM's with your current set up.

I would try it without the HEPA filter and see if performance is better.

Other than that, I would look for a dust collector. A 1HP model with probably be adequate.
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.