LumberJocks Woodworking Forum banner

Cutting Large Diameter Circles

3166 Views 9 Replies 3 Participants Last post by  Ottis
Does anyone have advice on how to cut a circle approximately 25" in diameter from 1/2" stock? Any help would be appreciated.

Thanks
1 - 10 of 10 Posts
How about a bandsaw with a circle cutting jig.
Do you have a Bandsaw or router ?
I have a router, Still working on a bandsaw, will a bandsaw jig cut a circle that large?
Thank You Gentlemen I was able to find a router circle cutting jig at woodcraft. have a great day.
Your welcome…if you decide you would rather make your own circle cutting jig for your router instead of buying one…me or just about any of us would be happy to tell you how.
I would sure be interested in making my own jig and would really appreciate the help.
Don, Thank you, That will work nicely, The only problem is picking one to make. I'll post it when I'm done.

Robert
Robert,
The last one is a plan from one of our fellow jocks it is almost the same as mine….. I also have the first one….both are easy to make and use.
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top