LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.
1 - 14 of 14 Posts

·
Registered
Joined
·
35 Posts
I am desperately trying to find a link to a crosscut sled design/build video that I saw on a forum about 6 months ago. I have searched extensively to no avail. The owner built himself a sled that would do dado cuts, bevel cuts and 90 degree cuts, all on one sled. It has an adjustable front fence that has five bolts holding it in place. The right side has a horizontal bolt that is used to micro adjust the fence forward or backward to get a perfect 90 degrees to the saw blade. The base of the sled used 1/2" plywood and sliding hardboard pieces over top to achieve zero clearance regardless of blade thickness or angle. There were two knobs threaded though the fence to secure the tops in place. I have looked a hundreds of sled vids and designs but this one is the cream of the crop. I would love to find it again. HELP! please and thanks.
 

·
Registered
Joined
·
35 Posts
Discussion Starter · #9 ·
Ya, Kiefer's sled is the one that I saw and was looking for. I was going to send a link to a couple of people who liked my sled (based on his design) but the vids are gone. Thanks for your help, everyone
 

·
Registered
Joined
·
35 Posts
Discussion Starter · #11 ·
Thanks, Tommy, but I have gone with Keifer's design and I am absolutely thrilled with it. One sled will do dados, regular cuts, and bevel cuts. All with zero clearance. I built a large one and a smaller one for the new Sawstop PCS.
 
1 - 14 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top